Nilfisk VL100 35L Instrucciones De Uso página 9

service. The carbon brushes may need to be replaced due to normal wear and tear
caused by using the vacuum cleaner over time, and they can be replaced only by our
authorized service centers.
WARNING
As with all electrical equipment, care and attention must be exercised at all times
during its use and operation. In addition, ensure that routine and preventative
maintenance is carried out periodically in order to ensure safe operation.
Failure to carry out maintenance as necessary, including the replacement of parts to
the correct standard could render this equipment unsafe and the manufacturer can
accept no responsibility or liability in this respect.
The following material must not be picked up by the vacuum cleaner:
Hazardous dust, hot materials (burning cigarettes, hot ash ,etc.), flammable,explosive,
aggressive liquids(e.g. Petrol, solvents, acids, alkalis ,etc.), flammable explosive
dust(e.g. magnesium or aluminum dust, etc.)
For wiring diagrams, refer to page 5 "Figure9/figure10".
Product Specification Parameter, refer to Page 5 "Form1".
9