Removing And Installing The Battery - Stihl RT 5097.1 Manual De Instrucciones

Opening the battery compartment:
Unscrew the retaining nut (1) and remove
the battery compartment cover (2)
forwards.
Closing the battery compartment:
Position the battery compartment
cover (1) as shown and fasten using the
retaining nut (2).
0478 192 9813 C - EN
15.19 Removing and installing the
battery
Risk of injury!
Always remove the black
negative (–) cable first and only
then, the red positive (+) cable.
When connecting the battery,
always connect the red positive (+)
cable first.
The battery is maintenance free
and must only be replaced if it is
damaged and must be removed in
the case of prolonged
immobilisation (e.g. winter break) or
disposal of the machine.
Do not dispose of the battery with
domestic waste, but hand it in to a
specialist dealer or at a hazardous
waste collection point.
● Stop the engine. ( 13.3)
● Engage the parking brake. (
● Remove the ignition key and keep it in a
safe place.
● Open the battery compartment.
( 15.18)
Installation position:
To connect or disconnect the battery (1),
pull it halfway out of the battery
compartment and tilt sideways. Then
guide the battery downwards once more
and set down – check for secure position.
Disconnecting the battery:
8.14)
Disconnect black cable (1) from the
battery negative (–) terminal by
unscrewing nut (2) using two A/F
8 spanners and removing together with
bolt (3), washers (4) and spring
washer (5).
55