6.SWitch On; 7.SWitch Off; 8.MUte; 9.WI-Fi Switch - Powersoft X Serie Manual De Instrucciones

3 : 6.Switch on
As soon as you connect the amplifier to the power grid, the
amplifier's power supply will start supplying power to the aux-
iliary systems. The border of the central button starts blinking
white: the amplifier is in standby mode.
A pressure on the central button will wake up the amplifier.
3 : 7.Switch off
Keep pressed the central button for 3 seconds to switch the
amplifier off. The amplifier platform passes to the standby mode
and the border of the central button blinks white.
The amplifier platform turns completely off only when the
mains connector is unplugged.
3 : 8.Mute
A short pressure on the central button toggles MUTE/
UNMUTE to all active channels: any previously muted channel will
remain in mute status.
All other circular buttons (except the central one) toggle the
MUTE/UNMUTE to the specified output channel.
MUTE/UNMUTE CH2
NOTE: Please note that when the amplifier platform is linked and
controlled by ArmoníaPlus™ all MUTE switches are locally disa-
bled.
3 : 9.Wi-Fi switch
Press the leftmost button: the button will light up and the
system will establish a new local Wi-Fi network whose SSID
is in the form: Powersoft-MODELNAME-SERIAL (e.g.
Powersoft-X8-70133) and default password: 0123456789.
Press again the leftmost button to switch the Wi-Fi off.
3 : 10.Armonía callback
In order to identify the unit into the Armonía Workspace, push
on the rightmost button. On the other hand, if you click on Un/
Blink from the contextual menu of the amplifier into the Armonía
Workspace, all the front LEDs of the amplifier will blink for a while.
20 | X Series
MUTE/UNMUTE ALL

Wi-Fi

The factory default frequency setting on an X Series amplifier
is 5GHz, but it's possible to change it to 2.4 GHz via ArmoníaPlus.
Follow this procedure to activate the Wi-Fi connection and
remotely access your Powersoft X Series amplifier platform.
1. Switch on the amplifier by holding down the central button
on the front panel;
2. Press the leftmost button in the front panel: the button will
light up and the system will establish a new local Wi-Fi net-
work whose SSID is in the form:
Powersoft-MODELNAME-SERIAL (e.g. Powersoft-X8-71520)
3. Access your mobile device and edit the Wi-Fi configuration;
4. Hang the Wi-Fi network with the right SSID;
5. Insert the following default Wi-Fi encryption password:
0123456789
6. Open the web browser and type the following IP address in
the address bar:
192.168.0.1
7. The system will push the user interface to the browser: now
you can start managing your X Series amplifier platform.
8. For simple recall and operation with the interface, we sug-
gest to bookmark the page on the home screen of your
mobile device; for example, in iOS device click on the share
icon and select "Add to Home Screen" when the interface
has been completely loaded.
9. Remember to switch the local Wi-Fi network off when
monitoring and basic setup are no more necessary: press
the leftmost button in the front panel in order to switch off
the Wi-Fi.
4