AL-KO HT 440 BASIC CUT Manual De Instrucciones página 17

HT 440, HT 550
Remove any adjusting key or wrench before tur-
„
ning the power tool on.
A wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
Do not overreach. Keep proper footing and ba-
„
lance at all times.
This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or
„
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
If devices are provided for the connection of dust
„
extraction and collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce dust-related
hazards.
Power tool use and care
Do not force the power tool. Use the correct po-
„
wer tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
Do not use the power tool if the switch does not
„
turn it on and off.
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
470518_f
Disconnect the tool from the power sour-
„
ce before making any adjustments, chan-
ging accessories, or storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.
Store idle power tools out of the reach of children
„
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools
the hands
Maintain power tools. Check for misalignment or
„
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool's operation.If damaged, have the power tool
repaired before use.
Many accidents are caused by poorly maintained
power tools.
Keep cutting tools
„
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits
„
etc. in accordance with these instructions, taking
into account the working conditions and the work
to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous
situation.
Service
Have your power tool serviced by a qualified re-
„
pair person using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
are dangerous
of untrained users.
sharp and clean.
EN
in
17