Kohler MasterShower Tower K-74 Instrucciones De Montaje página 7

D. SHOWERHEAD TRIM/SHOWERHEAD:
1.
See Fig. #13 . Apply thread sealant on mounting flange
thread. Place bellows over showerhead with tapered end of
bellows toward showerhead.
2.
Pull bellows back from wrench flats on showerhead ball joint.
To avoid scratching, carefully protect flats and wrench-tighten
or use a clean strap wrench.
Fig. #13
Kohler Co.
Mounting Flange
Bellows
Three-Way
Showerhead
E. TOWER ASSEMBLY:
1.
Identify the three #10-24 x 3/8" screws and washers provided.
Place washers over screws.
2.
Align hinge plates on tower door with brackets on wall
mounting box. Secure hinges with two screws in the upper
hinge and one screw in the lower hinge. See Fig. #14 .
Mounting
Screws
Tower
Door
7
Wall
Mount Box
Mounting
Screws
Fig. #14
A
1017598-2-