Description of Display Symbols
SYS
Indicates a measurement
within Stage 3 Hypertension.
DIA
SYS
Indicates a measurement
within Stage 2 Hypertension.
DIA
SYS
Indicates a measurement
within Stage 1 Hypertension.
DIA
Appears when batteries should be
replaced.
Explanation of Symbols
Symbol for "THE OPERATION GUIDE MUST BE READ" (The sign background color:
blue. The sign graphical symbol: white)
Symbol for "WARNING"
Symbol for "TYPE BF APPLIED PARTS" (The cuff is type BF
applied part)
Symbol for "ENVIRONMENT PROTECTION – Waste electrical products should
not be disposed of with household waste. Please recycle
where facilities exist. Check with your local Authority or retailer for
recycling advice".
Symbol for "KEEP DRY"
Shows the pulse rate per minute.
Occurs when an error was made
during measurement.
Appears when there is an irregular
heartbeat detected during
measurement.
Appears when the cuff is unstable or it
has too much air left in it. Once the arrow
stops flashing, the unit is ready to take a
measurement.
Appears when the unit is ready or a mea-
surement error has occurred. Restart the
measurement if an error occurs.
Appears when recalling a
measurement from memory.
16
Troubleshooting
If any abnormalty occurs during use, please check and correct the following:
Condition
Display is blank when power is on.
Measurement incomplete or
abnormally low or high values
displayed.
EE symbol displays.
Measurements are different from
those typically measured by
physician or every measurement
reading is different.
Correction
Check and correct the polarity of the installed
batteries. Reinstall or replace batteries.
Review and follow "Applying Your Blood
Pressure Cuff" and "Taking Your Blood Pressure
Reading" sections. Replace the batteries.
Do not talk or move during the measurement.
Review "Applying Your Blood Pressure
Cuff" section.
Remember, blood pressure readings are
influenced by physical and mental conditions
and/or even the time of day. Daily
measurements should be interpreted
by your physician.
17