Parameter Settings; Configuration - BONFIGLIOLI ACTIVE CUBE Guia De Inicio Rapido

5 Parameter settings

The parameters displayed in the PARA menu branch are partly set via the guided commissioning.
Additional Configurations with further parameter settings are described in the operating instructions manual.
Control Level
ters of the higher control levels 2 or 3 are described in the operating instructions and should be
set up by expert operators only.
Setting:

Configuration

of the software modules is selected by the configuration. The selection is made during the guided
commissioning.
Setting:
Program(ming)
knowledged (alternative to signal at digital input S1IND).
Setting:
Motor type
rated values and the guided commissioning are carried out on the basis of the parameterized mo-
tor type.
Setting:
Rated Voltage
Setting:
Rated Current
tor.
Setting:
Rated Speed
asynchronous motor.
Setting:
Rated Cosinus Phi
motor.
Setting:
Rated Frequency
the type plate of the asynchronous motor.
Setting:
Rated Mech. Power
nous motor.
Setting:
40
40
28 - The brief instructions describe the parameters in control level 1. The parame-
1 ... 3
30 - The basic function of the control inputs and outputs as well as the assignment
110 - sensor-less control with U/f characteristic for speed regulation in a great
number of standard applications
410 - sensor-less, field-oriented control, for applications with a high functionality
and dynamics
34 - The factory settings of all parameters is restored or a fault message is ac-
4444 Activate factory settings
123 Acknowledge fault message
369 – Setting of connected motor or transformer. The verification of the entered
0 - Unknown
1 - Asynchronous Three-phase asynchronous motor, squirrel cage
2 - Synchronous
3 - Reluctance
10 - Transformer
370 - Enter the voltage indicated on the type plate of the asynchronous motor.
60.0 V ... 800.0 V
371 - Enter the rated current indicated on the type plate of the asynchronous mo-
0.01⋅I ... 10⋅o⋅I
FIN FIN
372 – Enter the motor speed (at rated frequency) indicated on the type plate of the
-1 -1
96 min ... 60000 min
374 – Enter the cos (ϕ) value indicated on the type plate of the asynchronous
0.01 ... 1.00
375 – Enter the rated frequency (at parameterized rated speed) indicated on
10.00 ... 1000.00
376 - Enter the power (in kW) indicated on the type plate of the asynchro-
0.1⋅P ... 10⋅P
FIN FIN
The motor is not a standard type.
Three-phase synchronous motor
Three-phase reluctance motor
Transformer with three primary windings
09/08
09/08