Actual Values - BONFIGLIOLI ACTIVE CUBE Guia De Inicio Rapido

6 Actual values

The actual values in the VAL menu branch facilitate operation and error diagnosis.
R.m.s. Current
from the measurement in the three motor phases.
Display:
Output Voltage
ating point of the motor.
Display:
Active Power
Product of machine voltage, current and cosine phi
Display:
Actual Speed
the current load point.
Display:
Actual Frequency
quency of the drive calculated from the machine model.
Display:
Current Error
code are displayed. The current error is used for error diagnosis.
Display:
Warnings
The warning code can be read out via parameter 269.
Display:
Last Error
inverter will try to acknowledge some errors automatically, other errors will be reset via digital
input S1IND. The last error code is saved for error diagnosis.
Display:
09/08
09/08
211 - effective output current (motor current) of the frequency inverter calculated
0.0 A ... o⋅I
FIN
212 - output voltage of the frequency inverter modulated depending on the oper-
0.0 V ... U
FIN
213 - calculated power of the asynchronous motor at the current operating point.
0.0 kW ... P
FIN
240 - speed of the asynchronous machine calculated using the machine model and
-1
0.00 min ... 60000 min
241 - the current output frequency of the frequency inverter or actual fre-
0.00 Hz ... 999.99 Hz
259 - the cause which resulted in an error switch-off and the corresponding error
F0000 ... F9999
269 - if a critical condition is detected, this condition is indicated by the field WARN.
A0000 ... A9999
310 - the fault message is displayed immediately when a fault occurs. The frequency
F0000 ... F9999
-1
43
43