OPERATING INSTRUCTIONS
•
Preparing for use
•
Place the appliance on a stable, horizontal, and level surface.
Make sure that the surface is heat resistant and that the Smart fryer
is also positioned at least 6 inches (15 cm) away from any
surrounding objects.
•
Make sure that the trivet is securely placed inside the food basket.
Use the trivet handle, located in the center of the trivet to easily
insert or remove from the basket. Insert the power plug into a wall
socket. The unit will beep twice and the On/Off button will light up
to indicate the Smart Fryer is now ready for use.
Caution!
• Do not fill the food basket with oil or any other liquid, as this may
cause a fire hazard.
• Never use the Smart fryer without the trivet in place.
• Keep all ingredients in the basket to prevent any contact with the
appliance's heating elements. Do not overfill the food basket.
• Do not cover the air inlet on the top or the air outlet on the back of the
unit while the appliance is in use.
• Do not touch the inside of the appliance while it is operating.
• Never immerse the unit's housing in water or rinse it under the tap.
•
Using the appliance
The Smart fryer can be used to prepare a large variety of foods. Please
refer to the table in the "Settings" section for basic cooking times, or
refer to the included recipe book.
•
Pull the handle to carefully remove the food basket from the Smart
fryer, make sure the trivet is in place.
•
Put the ingredients that you will be air-frying into the food basket.
Note: Never fill the basket to capacity or exceed the recommended
amounts (see section 'Settings' in this chapter), as this could affect the
quality of cooking.
•
Slide the basket back into the Smart fryer.
www.KALORIK.com
9
FT 46689 BK – 200605