Loading The Battery (Batteries); Inserting The Sd/Mmc Card - Easypix DVC5016 Manual De Usuario

For select model only. Please refer to the package printing for detailed specifi cation.

Loading the battery (batteries)( )

1. Slide latch open to remove the battery compartment cover.
2. Load the battery (batteries) based on specifi cations of the camcorder as follows:
Camcorder supplied with AA batteries
Load four AA batteries into the compartment according to the (+) (-) orientation shown in the
battery compartment.
Never use different types or brands of batteries together, or mix used and unused
batteries.
Camcorder supplied with a lithium battery
Slide in the connector end of the lithium battery as the direction of the arrow shown and make
sure that the metallic contacts are aligned with the contacts in the compartment.
3. Replace the cover.

Inserting the SD/MMC card ( )

The camcorder has built-in internal memory for storage, but you can insert a SD/MMC memory
card to expand your camcorder's memory capacity.
1. Lift the memory card cover as shown.
2. Insert the card as the direction of indication until it reaches the end of the slot.
3. When the card is inserted successfully, the icon (
memory will become inaccessible.
To remove the card, push the card to release it and then pull it out gently.
) will appear on screen and the internal
2