Getting Started - Easypix DVC5016 Manual De Usuario

Getting started

Turning the power on/off
To turn on the camcorder, either open the LCD panel or press the Power button.
To turn off the camcorder, either close the LCD panel or press the Power button.
If the power is not turned on after you have completed the above procedures, please
check the following have been done correctly: Batteries are correctly loaded.
The loaded battery (batteries) has enough power.
The [Auto Off] setting may cause the camcorder to turn off after it is idle for a period
of time.
Mode selection
1. Use the Joystick
2. Use the Joystick
3. Use the Joystick
4. Use the Joystick
Choosing the screen language
Power-on → enter Setting mode → select the Language item → use the Joystick Up or Down to
select the language → use the Joystick Right to confi rm.
Setting the date and time
Power-on → enter Setting mode → select the Clock item → use the Joystick Up or Down to
select numbers for the YY/MM/DD and HH:MM fi elds → use the Joystick Right to confi rm each
fi eld → use the Joystick Left to exit.
Left to enter the Mode menu.
Up or Down to select the desired item.
Right to confi rm.
Left to exit.
4