Assemble nozzle packet
Figure 2, see cover page
Inser the O ring in the nut of the rotation
arm.
Place the nozzle on it.
Slightly fasten the nozzle with the Union
joint.
Figure 3, see cover page
Note:
The exit jet must be directed parallel to the
rotation arm.
Adjust the wrench area of the nozzle
(width 10) so that it is parallel to the ro-
tation arm.
Tighten the Union joint (width 22) using
a wrench.
Floor cleaning
Figure 4, see cover page
Connect the steel pipe of the high pres-
sure cleaner to the FR 30 and tighten it
with wrenches (width 24).
Wall cleaning
Preparing water vacuuming
Note:
With the accompanying suction hose port a
vacuum cleaner or a drain hose can be
connected.
Dismounting the wheel set (if
necessary)
Figure 5, see cover page
Unscrew the steering roller holder from
the device.
Reattach the screws to the device.
Attaching the suction hose port
Figure 6, see cover page
Remove cover.
Figure 7, see cover page
Secure the suction hose port with the
accompanying screws and nuts.
6
Connecting to the high-pressure
Figure 8, see cover page
Disconnect angle joint from the device
(spanner size 27).
Screw on the trigger gun and tighten it.
Water vacuuming
Figure 9, see cover page
Secure the hose on the suction hose
port by means of a hose clip.
Figure 10, see cover page
Hold the device on the centre strut.
Hold the device in a way that the hose
points down.
Suction
Figure 11, see cover page
Remove cover.
Figure 12, see cover page
Connect the suction hose to the suction
hose port.
Note:
Connection bushings are listed on the ac-
cessories sheet at the end of these operat-
ing instructions.
Figure 13, see cover page
Hold the device on the centre strut.
Hold the device in a way that the hose
points down.
Protect the appliance against frost.
Oil the steering rollers regularly.
Do not allow bristles to deform during
storage.
Only use original accessories and spare
parts, they ensure the safe and trouble-free
operation of the device.
For information about accessories and
spare parts, please visit www.kaerch-
er.com.
– 2
EN
cleaner
Care
Spare parts