Tabla de contenido
Publicidad
Installation Considerations
The following is a list of tools you will need for installing the RFQ5000
Red power wire
Blue remote turn-on wire
Black grounding wire
Electric hand drill w/assorted bits
Jeweler's slotted screwdriver
This section focuses on some of the vehicle considerations for installing your new RFQ5000.
Pre-planning your system layout and best wiring routes will save installation time. When decid-
ing how to lay out your new system, be sure that each component will be easily accessible for
making adjustments.
Before beginning any installation, be sure to follow these simple rules:
1.
Be sure to carefully read and understand the instructions before attempting to install the
RFQ5000.
2.
For safety, disconnect the negative lead from the battery prior to beginning the installation.
3.
For easier assembly, we suggest you run all wires prior to mounting your RFQ5000 in
place.
4.
Route all of the RCA cables close together and away from any high current wires.
5.
Use high quality connectors for a reliable installation and to minimize signal or power
loss.
6.
Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or
hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.
7.
Never run wires underneath the vehicle. Running the wires inside the vehicle provides the
best protection.
8.
Avoid running wires over or through sharp edges. Use rubber or plastic grommets to
protect any wires routed through metal, especially the firewall.
Wire strippers
Wire cutters
Voltmeter
Battery post wrench
9
Publicidad
Tabla de contenido
