Technical Design Features - Rockford Fosgate RFQ5000 Manual De Instrucciones

technical design features

Five channel discrete surround sound processing – Utilizing high speed voltage controlled ampli-
fiers, the RFQ5000 accurately decodes all modes of surround sound and sends the discrete
information to each of 5 individual channels.
Panorama control – The RFQ5000 works with any two channel analog source, but if the source
unit has dual pre-amp outputs (like all Rockford Fosgate source units) you can take advantage of a
feature called panorama control. Panorama control converts the fader in the source unit to a con-
trol that varies the width and depth of the stereo image. By simply fading from front to rear, you
adjust the panorama control.
Output level adjustments – these internal controls are used to adjust the individual output channels
of the RFQ5000, so that each channel has the same amplitude (SPL) at the drivers seat listening
position.
LF Gain: controls the signal level of the left front output
RF Gain: controls the signal level of the right front output
CF Gain: controls the signal level of the center front output
LB Gain: controls the signal level of the left back output
RB Gain: controls the signal level of the right back output
L SUB Gain: controls the signal level for the left subwoofer output
R SUB Gain: controls the signal level for the right subwoofer output
Center Channel Adjustment - By turning this control you adjust the relative focus of the center
channel from wide & diffuse to very precise & pinpoint. While listening to a track with center
channel information, simply adjust this control until the center channel blends properly with the left
and right front speakers.
3