Hamilton KHAKI CHRONO WORLDTIMER Manual De Instrucciones página 5

CHRONOGRAPH MODE (CHRONO)
NB: you can change the mode at any time without disturbing a timing in progress, as the chronograph is
independent of the Worldtimer function.
The time measured is displayed by the hands of counters 4 60 seconds, 5 12 minutes and 6 120 minutes.
Simple timing
Button : start
B
Button : stop
B
> Read time
Button : Reset to zero
C
WORLDTIMER MODE (TIME)
Selection of location "T2"
Press Button or to position hand 5 on one of the 24 locations given on the sloping outer ring of the dial.
B C
The current time at the selected location is displayed by hand 4 (hours) and hand 2 (minutes).
The position of hand 6 tells you if it is daytime or nighttime at the selected location.
NB: your watch automatically takes summer/winter time (DsT) into account for each of the given locations.
UTC time
Coordinated universal Time (uTC) is the time standard used in the civilian sector and in professional aviation.
Display of UTC time
Briefly press button : hands 4 and 6 will move and display uTC time. After a few seconds, the hands will
D
return to their initial positions.
M042 - INsTRuCTION MANuAL
Timing with intermediate times
Button : start
B
Button : Intermediate stop
C
> Read 1st intermediate time
Button : Restart with catch-up of elapsed time
C
Button : Intermediate stop
C
> Read 2nd intermediate time
And so on...
Finally, press button to stop the timing and read the total time.
B
Button : Reset to zero
C
3