ADJUSTMENTS
Important: in order to guarantee the water-resistance of your watch, always return the crown
screwed-in position (p0) after any adjustment has been made.
NB: each time the crown is pulled out to position (p2) or (p3), hands 4, 5 and 6 position themselves at 12
o'clock and the disk 7 at "CHRONO".
ADJUSTMENT OF HOURS AND DATE "T1"
• Unscrew the crown and pull it out to position (p2).
Rapid adjustment of the hours hand:
• Turn the crown in the desired direction to position hand 1 to the required hour.
Adjustment of the date:
• Turn the crown clockwise until
the desired date is displayed in
the window.
• Push the crown back in and screw it in to position (p0).
ADJUSTMENT OF HOURS AND MINUTES "T1"
• Unscrew the crown and pull it out to position (p3).
• Turn the crown to adjust to the hour and minute desired.
• Push the crown back in and screw it in to position (p0).
ADJUSTMENT OF THE COUNTER HANDS
After a battery change or a violent shock, it is possible that one or more counter hands or a disk are no longer
exactly at zero or aligned. If this is the case, proceed as follows to adjust them:
• Unscrew the crown and pull it out to position (p2).
• Press button
to select the hand or disk to be adjusted. The hand/disk selected will rotate 360°.
D
• Press button
or
B
C
in rapid forward movement
• Push the crown back in and screw it in to position (p0).
4
to move the selected hand (or disc) back or forward. A long press of button
to its normal,
A
results
C
© HAMILTON - AUgUST 2015