Necessary Tools - DUCASSE INDUSTRIAL Segmenta Serie Instructivo De Montaje

E
PIVOT DOOR MD KIT
2 Mounting plates
1 Upper Pivot Mobile plates
1 Lower Pivot Mobile plates
1 Upper pivot set
1 Quicio rodamiento
2 End caps
1 Spring aligner
1 Segmenta key
1 Allen key 2.5mm
1 Allen key 3mm
6 Screws
2 Bolts
F
KIT TRACK PIVOT DOOR SIGMA 45°
1 Full Track 100mm
1 Full Track brackets
1 Allen key 3mm
1 Allen Key 4mm
2 Bolts
F'
KIT TRACK PIVOT DOOR SIGMA 90°
1 Full Track 100mm
1 MRL1
1 Full Track Brackets
1 Half track brackets 20mm
1 Track pins
1 Allen key 3mm
1 Allen key 4mm
2 Bolts
IMPORTANT
The perpendicular stacking system
(curves 45°) always considers a passage
pivot door between both spaces. That
way, it is not necessary to have to stack
the whole system to be able to pass
through them.
In the parallel stacking system (curves 90°)
it is possible to do without this door and
use a fi xed panel.
For perpendicular stacking confi gurations
+ pivot door (curves 45°), "Pivot door MD
Kit" and "Kit Track Pivot Door Sigma 45°"
are also needed.
Only for the parallel stacking confi guration
+ pivot door, "Kit Track Pivot Door Sigma
90°" must be added.
*GROUND FIXATION AND DOOR HANDLES NOT
INCLUDED.

NECESSARY TOOLS

Drill
Drill bits ø3 / ø6 / ø35
Plumb line
Screw driver
Measuring tape
35