DUCASSE INDUSTRIAL Segmenta Serie Instructivo De Montaje página 57

A. Use ø3mm drill bit to drill the holes that will allow you to install the mounting plates.
B. Place the mounting plates in the door which has been set-up, both up and down, and
fi x with ø4.5 x 70 screws, making sure 5mm of separation from the edge of the door
is left.
A
55
ø 3
!
5mm separation
C. Insert the upper pivot mobile
plates (1) and lower pivot mobile
plates (2), top and bottom
respectively, fi tting them with
the mounting plates.
1
2.5
M4 x 10
2
2.5
M4 x 10
Pivot door set up and mounting
B
30
5
5
C
ø 4.5x70
ø 4.5x70
- Fix the end caps with N°2.5
Allen key.
step 3
B
57