Assembly - Attaching The Fan Blades; Attaching The Blades To The Blade Brackets - HAMPTON BAY 48-LG Guía De Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly - Attaching the Fan Blades

9
Attaching the blades to the blade
brackets
Attach a blade (H) to a blade bracket (G) by inserting screws
(AA) into the holes in the blade (H) and through the blade
bracket (G). Note that the rubber washers are preattached to
the blade bracket (G).
Tighten each screw securely.
Repeat these steps for each blade (H) and blade bracket (G).
AA
G
Assembly - Attaching the Switch Cup
11
Attaching the switch cup
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
Remove the four screws on the switch cup (E).
Connect the wires exiting the bottom of the black bracket
with the switch cup by connecting the molded adaptor
connectors together.
Secure the switch cup (E) to the black bracket using the four
screws that were removed in the first step above.
Attach the pull chain extension (GG) to the fan pull chain.
10
Fastening the blade
assemblies to the motor
IMPORTANT: Remove the rubber stopper on the black bracket
below the motor in order to attach the blade assembly to
the motor. Replace the rubber stopper to prevent water from
entering the switch housing and to reduce the risk of fire,
electric shock, or other personal injury.
IMPORTANT: The switch cup cover has an access hole (ZZ) to
allow the screwdriver to reach the screws in the blade bracket.
Position the blade assemblies on the motor and tighten by
inserting the screwdriver through the access hole (ZZ).
Fasten the blade assemblies to the fan-motor assembly (D)
by inserting the alignment post into the slot on the bottom
of the motor and tightening the pre-installed blade bracket
screws (TT) by inserting a screwdriver through the access
hole (ZZ).
Repeat this step for the remaining blade assemblies by
H
rotating the motor until the next blade bracket screw can be
accessed through the access hole (ZZ) in the switch cup.
GG
11
Please contact 1-855-HD-HAMPTON for further assistance.
D
ZZ
TT
G
E
H
HAMPTONBAY.COM

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

2668226684266851000 060 1681000 554 7111000 060 180

Tabla de contenido