Assembly; Making The Electrical Connection; Standard Mount - HAMPTON BAY 48-LG Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
5
Hanging the fan
WARNING: The hook as shown is only to balance the fan while
attaching wiring. Failure to hang as shown may result in hook
breaking, causing the fan to fall. The hook must pass from
inside to the outside of the canopy.
WARNING: When hanging the fan on the hook (XX) it is critical
that you use one of the non-slotted (round) holes in the
canopy (C).
□
Carefully lift the fan-motor assembly (D) up to the mounting
bracket (A).
□
Seat the hanger ball portion of the ball/downrod assembly (B)
in the slide-on mounting bracket (A) socket. Ensure that the
tab on the slide-on mounting bracket (A) socket is properly
seated in the groove in the hanger ball. If using close-to-ceiling
mounting, hang the fan on the hook provided by utilizing one of
the holes at the outer rim of the ceiling canopy (C).
XX
Close to ceiling mount
A
C
D

Standard mount

A
B
C
F
D
6

Making the electrical connection

WARNING: Each wire nut supplied with this fan is designed
to accept up to one 12-gauge house wire and two wires
from the fan. If you have larger than 12-gauge house wiring
or more than one house wire to connect to the fan wiring,
consult an electrician for the proper size wire nuts to use.
IMPORTANT: Use the wire connecting nuts (BB) supplied
with your fan. Secure the connectors with electrical tape
and ensure there are no loose strands or connections.
□
The fan comes with 54 in. lead wires for use with an
extended ball/downrod (B) provided. You can cut the
lead wire to your desired length (no shorter than 12 in.).
This will make extra room in the canopy (C). If you do not
wish to cut the wires, you will need to neatly wrap them.
□
Connect the fan motor green wires to the household
green or bare wire using a wire connecting nut (BB).
□
Connect the fan motor white to the household white wire
using a wire connecting nut (BB).
□
Connect the fan motor black and blue wires to the
household black wire using a wire connecting nut (BB).
□
Secure each wire connecting nut (BB) using electrical
tape.
□
Turn the wire connecting nut (BB) upward and push the
wiring into the outlet box (RR).
Black
Blue & Black
9
Please contact 1-855-HD-HAMPTON for further assistance.
Outlet box
in the ceiling RR
Green or bare wire
White
White Green
HAMPTONBAY.COM