Resetting The Headset; Storage Of Headset; Audio & Visual Indicators - Jabra BT100 Manual De Usuario

Resetting the headset

If the phone and headset fail to communicate properly, you may need to reset them. To
reset the headset, plug charging jack into headset with charger pulled into appropriate
AC socket. Verify the LED turns on, indicating the start of charging, then remove charging
jack. This resets the headset.

Storage Of Headset

1. Always store the JABRA BT100 with power off and safely protected.
2. Avoid storage at high temperatures (above 60 C / 134F) – such as in a hot vehicle or in
direct sunlight. (Storage at high temperatures can degrade performance and reduce
battery life.)
3. Do not expose the headset or any of its supplied parts to rain or other liquids.
18
All manuals and user guides at all-guides.com
Audio & Visual Indicators
Indicator Light Chart
Headset State LED Indication State
Power Off LED OFF (no charger)
Charging In Process LED ON (charger plugged in)
Charging Complete LED OFF (charger plugged in)
Configuration Mode LED ON (no charger) with boom closed
Pairing Mode LED ON (no charger) with boom opened
Pairing Successful Series of 10 rapid flashes
Search, Park, Link Flash or Double-Flash 0.1 sec ON, 2.9 sec OFF
(pulse with 3 second interval)
Audio Link (on a call) Flash or Double-Flash 0.5 sec ON, 1.5 sec OFF
1