Prodigy AutoCode Manual Del Proprietário página 32

STEP 4: Apply Control Solution
1. Shake the control solution bottle well, then
remove the cap.
2. Squeeze the bottle and discard the first drop,
then wipe the dispenser tip with clean tissue paper
or cotton.
3. Squeeze the bottle again to
get a second drop onto a clean,
non-absorbent surface or on
your finger. See Figure 18.
4. Bring the tip of the test strip to
touch the drop of solution un-
til the meter beeps.
Caution: To avoid contaminating the control
solution with the content of the test strip, do not
apply the control solution directly onto the test
strip from the bottle. See Figures 19 and 20.
AutoCode
®
Owner's Manual
Blood Glucose Meter
Figure 18
32