Safety instruction:
READ THESE INSTRUCTIONS CAREFULLY AND KEEP THEM
FOR FUTURE CONSULTATION.
WARNING: TO REDUCE THE POSSIBLE RISK OF FIRE,
ELECTRICAL DISCHARGES OR PERSIONAL INJURY, TAKE
THE FOLLOWING INTO ACCOUNT:
1. Proceed with care. Read the instructions in full before starting
the installation.
2. WARNING! This fan can only be used with a bipolar switch
with a contact opening of 3mm.
3. The installation process must only be carried out by an
authorized electrician.
4. The installation height, i.e. the distance between the blades
and the floor, should be at least 2.3 metres.
5. Make sure there are no obstacles within the area of rotation.
6. Make sure the fan is securely attached to the ceiling.
7. WARNING! Do not use a switch with a voltage regulator to
control the speed of the fan.
8. WARNING! To avoid damage, make sure that the blades are
not bent over and that there are no foreign objects within the
area of rotation.
9. WARNING! If the fan is installed close to the ceiling, the ceiling
may not be lowered using rails in accordance with European
safety regulations. This could cause serious injuries. If you have
any doubts in relation to these essential safety requirements,
consult local by -laws.
10. Keep all electronic appliances away from children or
impaired persons. Do not allow them to handle these appliances
without supervision.
11. Suitable for use enclosed spaces.
12. Make sure that the appliance is not connected to the power
supply before taking apart the components of the lamp.
Connect to the power supply only after the installation has been
completed.
13. Do not remove the shade from the lamp if the light bulb is on.
14. When you switch on the appliance, make sure that the
lampshade is secure.
15.
Always maintain the distance between the image
between the lamp and inflammable materials (curtains, wall,
etc.),
18