3. If the fan vibrates:
4. If the light does
not work:
3. Some motors are sensitive to signals electricity
semiconductor speed regulators. NEVER USE an
electricity semiconductor speed regulator.
4. What approximately 24 hours (period of
adaptation of the appliance)l The majority of the
noises produced by new fans disappear within that
time.
All blades have been weighed and grouped
together in accordance with the results. The density
of the blades may vary, because they are made of
natural wood. This may be the cause of the
vibrations of the fan, despite the fact that the blades
have been adapted according to their weight. The
fo l l ow i n g m e a s u re s s h o u l d b e s u f f i c i e n t to
eliminate the majority of vibrations:
Check the level of vibrations after each step.
1. Check that all blades are securely screwed to their
supports.
2. Check that all the supports are securely attached
to the motor.
3. Make sure that the cover and the assembly
support are securely attached to the ceiling mount.
4. If the fan continues to vibrate as before, you can
exchange two blades which are next to each other
for better distribution of the weight and so that the
appliance makes less noise when functioning.
1. Check that the Molex connector is connected to
the switch .
2. Check that the light bulbs are not defective.
3. If the lamp still does not work, contact a qualified
electrician.
22