Publicidad
Idiomas disponibles
Idiomas disponibles
2. Clean the fan regularly to keep it in perfect condition for many years. Do not use
water for this. It could damage the motor or the wood, or even cause an electrical
discharge.
3. Use only a gentle brush or smooth cloth to avoid scratches on the surface. The
surface has been varnished to minimise the effects of discoloration and passage of
time.
4. It is not necessary to lubricate the fan. The motor has a permanent lubrication
system.
RESOLVING PROBLEMS
If there are problems when you switch on your new ceiling fan, it is possible that the
assembly, installation or connection of the cabling have not been carried out
correctly.
Sometimes, these installation errors are confused with failures of the appliance.
If problem arise, please consult the table below.
If the problem is not resolved, contact a qualified electrician. Do not attempt to make
electrical repaire by yourself.
PROBLEM
1. If fan does
not start up:
2. If the fan makes
a lot of noise:
21
RECOMMENDED SOLUTIONS
1. Check the thermomagnetic switches or the
circuit breaker of the main and branch circuit.
2. Check the connections of the connector block, as
carried out in step no. 4 of the installation process.
Warning: Make sure that the main power supply is
disconnected.
3. Make sure that the sliding switch is in the upper or
lower position. The fan will not start up if the switch
is between these two positions.
4. If the fan still does not work, contact a qualified
electrician. Do not attempt to resolve electrical
connections failures yourself.
1. Inspect it to make sure that the screws of the
motor housing are firmly in place (but not too
tight).
2. Inspect it to make sure that the screws joining the
fan blades to motor are firmly in place.
Publicidad
