Assembling The Blower; Fuel - Stihl BG 50 Manual De Instrucciones

English

Assembling the Blower

Mounting the Blower Tube
3
2
Push the blower tube (1) with lug (2)
N
into the fan housing stub (3) and
rotate it in the direction of the arrow
to lock in position.
10
Removing the Blower Tube
1
Use a suitable tool to lift the tab (6)
N
on the fan housing stub (3).
Rotate the blower tube in the
N
direction of the arrow and then pull it
out.

Fuel

This engine is certified to operate on
unleaded gasoline and the STIHL two-
stroke engine oil at a mix ratio of 50:1.
Your engine requires a mixture of high-
6
quality gasoline and two-stroke air
cooled engine oil.
Use mid-grade unleaded gasoline with a
minimum octane rating of 89 ((R+M)/2)
3
and no more than 10% ethanol content.
NOTICE
Fuel with an octane rating below 89 may
increase engine temperatures. This, in
turn, increases the risk of piston seizure
and damage to the engine.
The chemical composition of the fuel is
also important. Some fuel additives not
only detrimentally affect elastomers
(carburetor diaphragms, oil seals, fuel
lines, etc.), but magnesium castings and
catalytic converters as well. This could
cause running problems or damage the
engine. For this reason STIHL
recommends that you use only quality
unleaded gasoline!
NOTICE
Gasoline with an ethanol content of
more than 10% can cause running
problems and major damage in engines
and should not be used.
For further details, see
www.STIHLusa.com/ethanol
The ethanol content in gasoline affects
engine speed – it may be necessary to
readjust the carburetor if you use fuels
with various ethanol contents.
BG 50