Accessories; Getting Started; Overview Of Modes - DragonTouch Vision 1 Manual De Instrucciones

ACCESSORIES

Waterproof Handle Bar/
Housing Pole Mount
Bandages Battery

GETTING STARTED

Welcome to your new Vision 1. To capture video and photos, you need a microSD
card (sold separately).
MICROSD CARDS
Use brand name memory cards that meet these requirements:
• microSD, microSDHC, or microSDXC
• Class 10 or UHS-I rating
• Capacity up to 64GB (FAT32)
Note:
1. Please format the microSD card firstly in this camera before using. To keep your
microSD card in good condition, reformat it on a regular basis. Reformatting
erases all of your content, so be sure to offload your photos and videos first.
2. FAT32 format microSD card stops recording when the storage of each file is over
4GB and starts to record again on a new file.
Battery
Please make sure the battery is full of power when use it for the first time.
04
Mount 1 Mount 2 Mount 3
USB Cable Clip Helmet Mounts
POWERING ON + OFF
To Power On:
Press and hold the Mode button for three seconds. The camera beeps while the
camera status light is on. When information appears on the LCD display or the
camera status screen, your camera is on.
To Power Off:
Press and hold the Mode button for three seconds. The camera beeps while the
camera status light is off.
SWITCHING MODE
To Switch Mode:
Turn on camera, press Mode button to switch mode.
To Exit Mode:
Press the Mode button to exit mode.

OVERVIEW OF MODES

There are 6 modes: Video, Photo, Playback, Video Setting, Photo Setting, General
Setting.
Video Mode
Video Mode is the default mode when you turn on the camera.
In Video Mode, press OK button, the camera starts recording video. Press OK button
to stop recording video.
01:18:54
720P
5
05