3. Screen Saver: 1min/3min/5min/off
Default setting is 1min.
4. Sounds
Shutter: On/Off, default is on.
Start-up: None/1/2/3, default is None.
Beep: On/Off, default is On
Volume: 0/1/2/3/4, default is 1.
5. Language: 简体中文, 繁體中文, English, 日本語, Pyckий, Deutsch, Français,
Italiano, Español, Polski, Nederlandse, Português, Turkey
Default setting is English.
6. Frequency: 50Hz/60Hz
Default is 60Hz.
7. Format: Yes/No
To keep your microSD card in good condition, reformat it on a regular basis.
Reformatting erases all of your content, so be sure to offload your photos and
videos first.
8. Default Setting: No/Yes
This option resets all settings to their default values.
9. Version
Model: Vision1
Version: FX191025V1
Manufacturer: DragonTouch
You can check the model, version and manufacturer of your Vision 1.
10
SHOOTING FILMS-VIDEO MODE
1. To start recording: Press the Shutter/Select Button. The camera status light will
flash while recording.
2. To stop recording: Press the Shutter/Select Button.
3. When recording starts, to switch modes is not available. To switch mode, please
stop recording first.
4. This camera automatically stops recording when battery is out of power.
Your video will be saved automatically before the camera powers OFF.
CAPTURING OHOTOS-PHOTO MODE
1. Shooting photo: In Photo Mode, press OK Button to shoot photos.
2. Burst: To use this function, go to Settings - Photo setting - Capture Mode, select
Burst. Then go to Photo Mode, press Shutter/Select Button to burst. Set Burst to
off, the camera would be in normal shooting mode.
PLAYING BACK YOUR CONTENT
You can play back your content on the camera's LCD display, your computer, TV, or
smartphone/tablet.
You can also play back content by inserting the microSD card directly into a device,
such as a computer or compatible TV. With this method, playback resolution
depends on the resolution of the device and its ability to play back that resolution.
VIEWING VIDEOS AND PHOTOS ON YOUR Vision 1
1. Enter Playback mode. If your microSD card contains a lot of content, it might take
a minute for it to load.
2. Press the Down button to scroll through the video or photo files.
Note: This camera does not support MAC computer or iPad tablet
11