Customizing Your Vision 1; General Setting - DragonTouch Vision 1 Manual De Instrucciones

General Setting Mode
Press Mode button several times to switch to Camera Setting Mode. You can change
General settings in this mode.
Date/Time
Auto Power Off 3min
Screem Saver 3min
Sounds
Language
Enter Back
OK MODE

CUSTOMIZING YOUR VISION 1

Video Setting
1. Video Resolution: 1080P 1920*1080/720P 1280*720/VGA 640*480
Default setting is 1080P.
2. Loop Recording: Off/5minutes/10minutes/15minutes
Default setting is Off.
Using Loop Recording, you can continuously record video, but save only the
moments that you want. For example, if you select a 5-minute interval, only the
previous 5 minutes are saved when you press the OK button to stop recording.
If you record for 5 minutes and do not press the OK button to stop recording and
save, the camera records a new 5-minute interval by recording over your previous
5 minutes of footage. When the microSD card is full, the new files will cover the old
one if loop recording is on.
08
Frequency
Format
Default Setting
Version
En
Enter
OK
3. Exposure: -2.0, -1.7, -1.3, -1.0, -0.7, -0.3, 0, 0.3, 0.7, 1.0, 1.3, 1.7, 2.0
Default setting is 0.
By default, your camera uses the entire image to determine the appropriate
exposure level. However, Exposure lets you select an area that you want the camera
to prioritize when determining exposure. This setting is particularly useful in shots
where an important region might otherwise be over- or underexposed.
60Hz
When you change this setting, the LCD display immediately shows you the effect on
your image. If you change modes, the camera returns to using the entire scene to
determine the correct level of exposure.
4. Date Stamp: Off/On
Default setting is On.
Back
MODE
Photo Setting
1. Photo Resolution: 12M/10M/8M/5M/3M/2M/1.3M/VGA
Default setting is 5M.
2. Capture Mode: Single/Self 2S/Self 10S/Burst
Default setting is Single.
3. Quality: Super Fine/Fine/Normal
Default setting is Fine.
4. Exposure: -2.0, -1.7, -1.3, -1.0, -0.7, -0.3, 0, 0.3, 0.7, 1.0, 1.3, 1.7, 2.0
Default setting is 0.
5. Data Stamp: Off , Date, Date/Time
Default setting is Date/Time.

General Setting

1. Date/Time: MM/DD/YYYY
2. Auto Power Off: 1min/3min/5min/off
Default setting is 3min.
09