- Connect the converter to an
outlet and then to the power
connector on the camera.
- Connect the BNC cable from the
camera (BNC connector drawing) to
a BNC video input of a monitor or DVR.
Note: To connect multiple cameras must do so in parallel.
10
Connection
- Connect the RS-485 cable plug to model CCTV-
255 control or DVR, taking care of polarity. In case
of a DVR, check the protocol type to match that of
the camera.
1
MAIN OUT
C
CH4
4
MAIN OUT
LAN
ALARM
IN
+
2
3
4
G G -
ALARM
RS422
OUT