Metra 99-3014G Instrucciones De Instalación página 4

ISO DIN radio provision
1. Mount the pocket to the radio
brackets with the (4) #8 x 3/8"
Phillips screws supplied. (Figure A)
2. Mount the bracket/pocket
assembly to the radio trim panel
with the (4) #8 x 3/8" Phillips
screws supplied. (Figure B)
3. Slide the radio into radio brackets
and secure with screws supplied
with the radio. (Figure C)
4. Clip factory climate controls into
the radio trim panel
5. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
6. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
99-3014G
(Figure B)
4
(Figure C)