1. Unclip and remove the trim panel
surrounding the radio/climate
control panel. (Figure A)
2. Remove (4) 9/32" screws securing
the radio/climate control panel.
(Figure B)
3. Unclip and remove the factory
climate controls
4. Remove (2) 9/32" screws securing
the CD player then unplug and
remove the player. (Figure C)
5. Unclip and slide out the Onstar
module and the tuner box then
unplug and remove them.
Note: The Onstar module will
need to be returned to the sub
dash in a lower position from
factory. (Figure C)
Continue to kit assembly
Dash Disassembly
(Figure A)
(Figure B)
99-3014G
(Figure C)
2