Motorola PMLN6521 Guia Del Usuario página 3

INTRODUCTION
The Vehicular Charger/Holder Kit provides additional operating
convenience when using the TETRA Handportable Terminal in an
automotive environment. This User Guide provides instructions for
using the Vehicular Charger/Holder Kit.
The PMLN6432 and PMLN6433 (coupled with NNTN8040) and
PMLN6434 and PMLN6431 Vehicular Charger Kits charge the
TETRA MTP6000 Series Handportable Terminal battery whenever
the TETRA MTP6000 Series Handportable Terminal is mounted in
the cradle and the vehicle ignition is ON.
The PMLN6521 and PMLN6522 Vehicular Radio Holder Kits provide
a radio mounting solution. The radio holder secures the radio inside
the moving vehicle while allowing easy removal when required. The
PMLN6521 & PMLN6522 Vehicular Radio Holder Kits do not provide
charging.
Attention
Read all safety instructions found in the User Guide supplied with
your TETRA Handportable Terminal prior to using your TETRA
Handportable Terminal or the Vehicular Charger/Holder Kit.
EUROPEAN UNION DIRECTIVE OF
CONFORMANCE STATEMENT
The PMLN6432, PMLN6434, PMLN6433 and PMLN6431 Vehicular
Charging Cradles are in conformance with the requirements of the
applicable Council Directive 04/104/EC and 99/5/EC.
The PMLN6434 and PMLN6431 Vehicular Charging Kits are suitable
for motor vehicles with a 12 volts battery powered electrical system
with negative earth. The equipment must be installed according to
the recommendations of the Installation Manual and the vehicle
manufacturer.
The Vehicular Charger Kit and Vehicular Radio Holder Kit listed
below comprises of the following parts:
PMLN6521 Vehicular Cradle Kit
- Vehicular Cradle (0104058J64)
- Remote Speaker Microphone (RSM) Bracket (PMLN6240)
- Mounting Bracket (FTN6376)
- User Guide (68012009012)
- Installation Manual (68012009013)
1