Motorola PMLN6521 Guia Del Usuario página 8

TROUBLESHOOTING
This paragraph provides typical malfunctions that can occur during
the operation of the PMLN6432, PMLN6434, PMLN6433 and
PMLN6431 Vehicular Charger Kits. The paragraph also suggests
corrective actions.
Prior to troubleshooting the malfunction, verify the following:
• Your TETRA Handportable Terminal functions properly outside
the cradle.
• The cable to the cradle is properly connected.
Identify the malfunction in accordance to Table 1 below. If the
malfunction does not appear in Table 1 below, refer to your Service
Provider.
Follow steps in Table 1 below after inserting the TETRA
Handportable Terminal into the cradle and turning the ignition switch
to ON.
No. Malfunction
1 Indication of
charging on
the TETRA
Handportable
Terminal
display does
not exist.
2 Charging
Indication
does not exist.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used
under license. All other trademarks are the property of their respective owners.
© 2013 Motorola Solutions, Inc. All rights reserved.
Table 1: Troubleshooting Procedures
1. Remove the TETRA Handportable
Terminal from the cradle and install
it again.
2. If the malfunction persists, refer to
your Service Provider.
1. Verify that the ignition switch is in
ON position.
2. Remove the TETRA Handportable
Terminal from the cradle and install
it again.
3. If the malfunction persists, refer to
your Service Provider.
Corrective Action
6