Rampage 9950919 Manual Del Usuario página 7

Installation Steps
VERTICAL TIRE MOUNT option. Mount tire holding bracket. Note: We recommend to set the tire mount into the width
of the spare tire.
18
(1) M12x40 Hex Bolt
Assemble Heim joint together and Mount Heim Joint
and connect to rear tailgate plate as shown below.
(2) M12x70x31 Hex Bolt
(2 M12x24 OD Washer
(2) M12 Nylon Lock Nut
19
Mount spare tire the tire mount using the supplied wheel Lug Nuts as shown below.
CAUTION: 2 person lift
VERTICAL TIRE
21
I-9950919 REV. B
NOTE: Actual product may vary from illustration.
(2) M12x80 Hex Bolt
(4) M12x24 OD Washer
(2) M12 Nylon Lock Nut
(4) M12x40 Hex Bolt
(4) M12 Lock Washer
Page 7 of 8
Mount the other side of the Heim Joint and connect to
rear tire swing away arm as shown below.
20
(3) 1/2"-20 Lug Nut
March 2020