Operation, Check - Getinge VS60 Manual De Usuario

OPERATION, CHECK

WARNING!
Consider the risk of burns when
loading the sterilizer.
CAUTION!
Only sterilise items intended for
sterilisation with steam and that
can withstand at least 121 de-
grees.
CAUTION!
Only use loading equipment espe-
cially designed for the VS series.
Each standard basket may be
loaded with max. 12 kg of goods.
To ensure optimal ergonomics use
a lifting device when processing
heavy loads.
Recommended accessories
Basket, part no. 566687401
Solid, stainless steel container
48325031
WARNING!
Remember the goods are hot after
sterilising.
Never attempt to open the door
until the pressure gauge has re-
turned completely to zero.
LOADING
Placing items in the sterilising chamber. Only use
loading equipment especially designed for the VS
series. Carefully check that nothing is caught be-
tween the door and chamber.
Place moisture-sensitive items and low-mass items at
the top of the chamber.
Place heavy items at the bottom of the sterilising
chamber.
Place dish-shaped items dish side down.
Place empty containers (bottles, test tubes, etc.) with
their opening downwards.
Close the door and pull the handle clockwise to lock.
START
Press the START button, the cycle starts and will be
completed automatically.
When the display shows
lamp comes on and when the pressure gauge shows
zero the process is completed.
The display never shows
lamp for process finished never comes on if the proc-
ess is interrupted.
As soon as the door is opened
shown on the display, this provides information that if
is not shown on the display, then the goods in
F I N I S H
the chamber may have been loaded by "someone
else", but not sterilised.
If the red status lamp for an alarm is on after a sterilis-
ing process, the goods should be considered as un-
sterilised and must then be sterilised again.
When the door opens
F I N I S H
the display.
The display now shows:
0
(last selected program)
INSTRUMENT 134 C
0
00.05.00 134 C
, the green status
F I N I S H
and the green status
F I N I S H
is no longer
F I N I S H
is no longer shown on
OPERATION, CHECK