Harbor Breeze E-TLE44BNK5C1 Manual Del Usuario página 13

INSTALLING FAN WITHOUT LIGHT KIT
2.
Remove the hex nut (K) and lock washer (L)
from the threaded rod at the top of the light kit
fitter (F). Unscrew the switch housing cap (M) to
remove it from the light kit fitter (F), and then
gently feed the BLACK and WHITE wires from
the light kit fitter (F) through the hole in the
middle of the switch housing cap (M).
3. Place cap (AA) firmly in hole in middle of switch
housing cap (M). Align holes in switch housing cap
(M) with holes in switch housing, then re-tighten
switch housing cap screws (N) previously removed
(Step 1, page 12).
Hardware Used
AA
Cap
4.
Attach applicable pull chain extension (CC) or
custom pull chain extension (not included) to fan
pull chain.
Hardware Used
CC
Pull Chain Extension
2
K
L
3
x 1
N
AA
4
x 1
CC
Lowes.com/harborbreeze
13
WHITE BLACK
M
F
Switch Housing
M
N