ESYLUX PD 360i/8 DALI ADR Manual De Instrucciones página 17

Switching on the orientation light
When pressed for the first time, the orientation
light will be set to the preset value (lux and
switch-off delay time of orientation light).
The LED will flash quickly for 2 seconds.
The lighting will be switched on in standby mode.
The lighting will turn off once the switch-off delay
time of the orientation light has elapsed.
Switching off the orientation light
When the button is pressed, the detector will exit
orientation light mode. The LED will turn on for
2 seconds.
Switch-off delay time, orientation light
3 switch-on times (5, 15 and 60 minutes) at the
push of a button.
The addition function can be used.
Luminous efficiency of the orientation light
Orientation light = 10/30/50 %
The addition function can be used.
Dimmer function
When the buttons are pressed, the detector will
start decreasing or increasing the illuminance.
If programming mode is not active, the value will
not be stored.
When the detector is switched on again, the values
stored in programming mode will be reactivated.
If programming mode is active, the set value will
be stored.
Selecting the channel
Channel 1 always activated. Channel 2 not
activated/available.
GB
17