Steren PBX-100 Manual De Instrucciones página 66

3.2. Basic commands
3.2.1 Enter into the System programming status
- Format: #*
- Example: To program the system, you should enter #*.
Pick up
Dial # * Listen a tone
Ext. 601
- You need to dial "#" in Direct-Dialing-Out mode.
- In the default setting, is in the Indirect-Dialing-Out mode.
- Remember for programming the telephone use the 601, 602,
603, or 604 extensions.
3.2.2 Flash time setting
Format: 00F#
F01 >>>>> 0,8s
F02 >>>>> 1,0s
F03 >>>>> 1,2s
F04 >>>>> 1,5s
F05 >>>>> 1,8s
8