3.7 Setting Operator and Ring Ext.
3.7.1 Setting Operator
-Format: 1 5 N #
-Explanation: N is the extension number (1-8)
-Description: To assign any extension as an operator. The extension
602 is the default setting.
Example: To set the extension 602 as an operator.
In
programming
Dial 152#
Listen a tone
Hang up
mode
In operator mode this programming doesn´t change the ringing
extension assignment.
3.7.2 Assing Ringing Extensions for Certain Lines
-Format: 3 M N 0 #
-Explanation: M is the line number (1-3) and N is the extension
number (1-8).
-Description: When you receives a call (In operator mode) to the line
M, the extension N will ring.
-Default setting: The extensions 601 y 602 will ring.
16