Accessories; Operational Sequences - estech COBRA 604-4810B Instrucciones De Uso

430-11902-02 Rev N

6. ACCESSORIES

Instrument Cable
The Instrument Cable is inserted into one of the ISOLATED PATIENT
CONNECTORS (see Figure 5-8) and connects an Electrosurgical Probe
to the ESU. The mating plug connectors have a locking mechanism for
secure cable installation.
Electrosurgical Probe
The ESU supports monopolar Electrosurgical Probes with any number of
electrodes. However, the ESU is only capable of driving up to 7
electrodes simultaneously.
The ESU is also designed to accept monopolar Electrosurgical Probes
that have an integral Instrument Cable. Probes with integral cables are
designed for single use applications.
Indifferent Electrode
The ESU supports two Indifferent Electrodes that can be connected to
connectors on the front panel.

7. OPERATIONAL SEQUENCES

In-service
An initial orientation may be conducted with our AtriCure account
representative. All set-up steps and function checks will be covered
during your in-service. The features and functionality of your unit will be
also covered at that time.
Initial Installation
1. Connect the ESU Power Cord plug into a properly grounded AC
electrical outlet designated "Hospital Grade" or "Hospital Only".
2. Connect the ESU Power Cord plug into a properly grounded AC
electrical outlet designated "Hospital Grade" or "Hospital Only".
CAUTION: Never use an outlet without a grounding connection.
3. Position the ESU for easy viewing of its front panel displays.
4. Install two DIP (Dispersive Indifferent Patch) Electrodes into the
INDIFFERENT ELECTRODE receptacles located on the ESU front
panel (see Figure 0-1) as follows:
CAUTION
Follow the instructions in this section carefully to prepare
the System for operation:
Page 20 of 411