Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
During charging, the different displays- Charging current (in mA), Time elapsed (in hh:mm),
Terminal voltage (in V) and Accumulated capacities (in mAh or Ah) may be toggled and
selected by pressing the DISPLAY key (refer Table 4).
After the rechargeable battery is fully charged, "Full" sign will be shown on the display and the
user may take out them at this time. Or if the rechargeable batteries are kept placing at the
compartments, trickle charging will start. The trickle charging current is around 5% of the
selected charging current to keep the rechargeable batteries being full.
Note :
The current cannot be altered once the setting has been confirmed in the initial stage.
This can avoid the user changing the current setting accidentally while doing setting on
other rechargeable batteries. If one wants to change the applied current afterward, the
rechargeable batteries must be taken out and inserted again.
The maximum charging current of other rechargeable batteries are restricted by the
current setting of the first inserted rechargeable battery. For instance, if the first inserted
"Full" sign is shown -The
battery is fully charged
36
Publicidad
Tabla de contenido
