rechargeable batteries are removed. User can switch to other displays by pressing the
DISPLAY key.
TRICKLE CHARGING
After the rechargeable battery is fully charged in any of the operating modes, the charger will
give a small amount of current to the rechargeable batteries to maintain the fully charged level.
This mode is automatically launched after rechargeable batteries are fully charged and kept at
the charging unit. The signal "Full" will be displayed on the LCD.
DISPLAY MODE INFORMATION
User can use different display modes to monitor the rechargeable battery condition during the
different operations (see below figure and Table 4 to 7).
By pressing the Display key consecutively, the LCD will show the following information
Battery capacity displayed in
(mAh) as the checking is
finished in Test mode.
43