Technoline BC-700 Manual De Instrucciones página 39

For new rechargeable battery it is recommended to charge it with 200 mA current for re-
conditioning it from the long storage status.
DISCHARGE MODE
Discharge mode will first discharge the rechargeable battery then charge it. It is for removing
the memory effects of rechargeable batteries.
By pressing the MODE key within 10 seconds after inserting the rechargeable batteries, the
Discharge mode can be selected. (The mode key shall first be pressed and held for about 1
second to activate the mode change. The subsequent pressing of the mode key will enable to
toggle between the "Charge", "Discharge", "Test" and "Refresh" mode.)
Then user may also select different discharging current (see Table 2) by pressing the
CURRENT key, within 10 seconds after inserting the batteries. (The display will blink once to
indicate the setting has been confirmed and the current cannot be changed afterward.)
When the battery is overheated the
charging will ceases automatically.
"000 mA" will be displayed.
38