Installation - Candy AQUA 2D E Manual Del Usuario

2. INSTALLATION

Unscrews the 2 top screws (A)
l
remove the cover, sliding it off
horizontally (fig. 1) and remove
the cardboard protection.
Unscrews the 2 tie braces (B)
l
on the crosspiece (with an H.
19 spanner) and remove the
polystyrene spacers (C) under
it (fig. 2).
WARNING:
Please do not fit the 2 tie
braces (B) again.
Do not remove the spacers (D)
above the crosspiece.
Lean the machine forward and
l
remove the
containing the 2 polystyrene
blocks at the sides, pulling
downwards (fig. 3).
Replace the cover with the 2
l
screws (A). Please ensure when
fitting the table top, the locating
pins are inserted correctly in their
slots, positioned on the side of
the cabinet as shown in fig. 4.
WARNING:
Keep packaging
away from children.
plastic bags
materials
45
1
A
C
2
D
3
4
B
A