Operating The Robot; Charging The Robot - domoova DRV100 Manual Del Usuario

EN

Operating the robot

Charging the robot

Figure 1
The robot must be switched on while it is being charged.
There are two ways to charge the battery:
• Using the home base (Figure 1).
• Using the power adapter (Figure 2).
The robot can take between 250 and 380 minutes to fully charge for
a runtime of 80 to 120 minutes (depending on the suction power).
NOTE:
• Before using the robot for the first time, you must fully charge the appliance.
• When the robot's battery is completely flat, the AUTO indicator light turns
steady orange. While charging, the indicator light flashes orange. Once fully
charged, the AUTO indicator light turns steady green. After a few minutes, the
robot switches to standby and the indicator light turns off.
• When the battery is charged, the robot switches to stand-by. Press the AUTO
button on the robot or on the remote control to switch it back on.
• If the battery is weak while the robot is cleaning, it automatically returns to its
home base. The home base must therefore be switched on.
• Do not place a mirror or other highly reflective object within a distance of at
least 15 cm from the home base.
• If the robot is not used for a long period of time, you are recommended to fully
Figure 2
12