EN
Operating the robot
MANUAL mode
The robot can be manually guided to a specific area in the room.
The robot needs to be paused via the AUTO button in order to use
Manual mode. Use the arrow buttons on the remote control to direct
the robot to where you would like to clean.
NOTE:
•
You can only guide the robot manually when the robot is paused.
•
While using Manual mode, the robot's suction starts in the same way as an
automatic cleaning cycle.
•
The "down" arrow does not work in Manual mode. It can only be used when
setting the time and scheduling cycles.
HOME mode
If you wish to charge the robot at any time while it is cleaning,
you can do so by pressing the "Home Base" button on the remote
control. The robot will automatically go back to the home base after
searching (search time depends on the distance between the home
base and if there are any objects along its route).
22