domoova DRV100 Manual Del Usuario página 38

EN
Troubleshooting
To avoid breakdowns/malfunctioning, regularly check and clean the
appliance accessories.
No. Malfunction
The appliance
01 does not switch
on.
The robot does
02 not charge any
more.
Appliance
03
suction lost
Possible causes
1. The appliance is not
switched on.
2. The appliance has
run out of battery.
1. The robot is not
correctly positioned
on the home base or
it is not plugged in
correctly.
2. The robot is not
switched on.
1. The dustbin is full.
2. The cyclone
protection filter is
dirty.
3. The central brush or
the side brushes are
blocked.
36
Solutions
1. Switch the power
button to ON.
2. Charge the robot
using its home base or
plug it in to the power
cable.
1. Correctly reposition
the robot and its
power sensors on the
home base sensors.
2. Switch the robot on.
1. Empty the dustbin and
clean the filters.
2. Clean the cyclone
protection filter.
3. Remove any hair
and debris from
the brushes. Check
that there is no dirt
obstructing the robot.