domoova DRV100 Manual Del Usuario página 32

EN
Maintenance
1. Open the HEPA filter cover to clean it (Figure 1). The HEPA filter
cannot be cleaned, otherwise it would become damaged.
To extend the filter's life, gently shake it outside to remove any small
dust particles that may have gathered. If the HEPA filter is damaged,
you are recommended to replace it to ensure that your robot's filter
performance is maintained.
2. Open the dustbin to access the protection filter. Unclip the
protection filter from the cyclonic part by squeezing the release
notches (Figure 2).
Carefully shake it to remove any larger dust particles and clean it
with clean water. Let it completely dry before putting it back in the
dustbin.
NOTE:
• The protection filter and cyclones ensure powerful suction and optimum air
filtration. The HEPA filter filters finer dust particles before letting the air out.
• The HEPA filter's useful life is extended thanks to the cyclonic vacuum system's
effectiveness.
30