TEMPUR-PEDIC Ergo Smart Base Manual De Instalación página 12

MAKE ALL CABLE CONNECTIONS
22
STEP 5
Screw the legs into the base. Do not
overtighten.
STEP 6
Locate the QR code sheet. Set it aside
for later.
• The customer will need this QR
code in order to connect to the
Sleeptracker app.
STEP 7
Untie the bundled cables in the head
section of the base, and run them
under the central leg bar and across the
horizontal split toward the foot section.
STEP 8
Plug the white USB extension cable
into the white Sleeptracker Smart
Cable on the foot section of the base.
STEP 9
Plug the USB charger cable into the
free port of the W-shaped splitter cord,
located next to the motor control box in
the foot section of the base.
STEP 10
Plug the head motor cable, marked with
a yellow #1 tag, into the head motor port
on the control box, labeled with a #1.
STEP 11
Plug the remaining head vibration cable
into the free #4 port on the control box.
23